Hana Wireless HW-N14-2F FRP NEMA 14x12x7 w/ 240VAC, FAN

Start with the Box...

Mounting Plate

The enclosure also features holes for two N-Bulkhead Lightning Protectors or Connectors, a grounding lug and cable conduit connector.

Hot Environments

To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in cooling fan, internal temperatures can be better maintained. This model is ideal in Hot environments.

The HW-N14-1F model includes a thermostat-controlled 12W (Max) fan. The high airflow, low noise fan used allows air to be pushed or pulled through the enclosure. Filters for both ports are easily removable for cleaning and replacement. The fan turns on when the internal temperature rises to 120° F (49° C) ±5° and turns off at 90° F (32° C) ±10°. The cooling fan does not require the use of any of the AC outlets, leaving them all available for your equipment

Lightning Protection

Surge protection is provided as a standard feature on the internal AC outlets. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. 

• Molded Fiberglass Reinforced Polyester (FRP) industrial Enclosure
  
• Stainless steel quick release latches with padlock hasps
  
• NEMA Type 3R, 3RX / IP24 rated
  
• Fully gasketed raised Vented lid with removable filters & integral mounting flange
  
• Features aluminum mounting plate with surge protected duplex 120 VAC Outlets & Thermostat Controlled Cooling System