Hana Wireless HW-N14-1HFS FRP NEMA 14x12x7 w/120VAC, HEAT, FAN, SS

Start with the Box...

Mounting Plate

The enclosure also features holes for two N-Bulkhead Lightning Protectors or Connectors, a grounding lug and cable conduit connector.

Hot and Cold Environments

To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in Heater and Cooling fan, internal temperatures can be better maintained. This model is ideal in Hot and/or Cold environments.

The HW-N14-1HFS comes with a 120 VAC 200 watt heating element and 120 VAC cooling fan. The fan and heater are controlled by Hana Wireless' exclusive solid state temperature controller. The standard unit has a fan turn-on temperature of +93° F (34° C) ±5° and a heat turn-on temperature of +16° F (-9° C ) ±5° The controller features improved temperature set-point accuracy and can be factory modified for other temperature set-points. The heater and fan are controlled by two integral high current solid state AC relays. The relays feature Zero Cross Detection for EMI reduction. No extra room for the controller is required since it is mounted underneath the plate. (A minimum order quantity is required for custom fan set-points and other configurations.)

Lightning Protection

Surge protection is provided as a standard feature on the internal AC outlets. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. 

• Molded Fiberglass Reinforced Polyester (FRP) industrial Enclosure
  
• Stainless steel quick release latches with padlock hasps
  
• NEMA Type 3R, 3RX / IP24 rated
  
• Fully gasket-ed raised Vented lid with removable filters & integral mounting flange
  
• Features aluminum mounting plate with surge protected duplex 120 VAC Outlets & Solid State Thermostat Controlled Heating & Cooling System