(314)735-0270

Mimosa B11 10.0-11.7 GHz 1.5Gbps Capable PtP Backhaul

Mimosa B11 10.0-11.7 GHz 1.5Gbps Capable PtP Backhaul
Mimosa B11 10.0-11.7 GHz 1.5Gbps Capable PtP Backhaul
SKU: B11
Brand: Mimosa
Please Note: FCC License Required for this link. Frequency Coordination / Link Path Coordination can be purchased below, includes FCC License.

Please Contact our office at 314-735-0270 for BEST PRICING, antenna requirements and any further questions

Mimosa’s B11 backhaul radio is designed for the modern Internet era, adapting instantly to variable upstream and downstream bandwidth requirements, at the lowest cost per Mbps in the industry.

Just Add Fiber

Fiber to wireless is the future of connectivity, and the B11 is ready for it. Simply add your preferred SFP module and you’ll be lit up with gigabit fiber speeds. If you’re not quite ready for fiber, the B11 is still for you with a standard Gigabit Power-over-Ethernet connection.

Bandwidth Changes like Night & Day

Nighttime streaming video has driven downstream traffic to peak at nearly 90% of consumption, while daytime symmetric traffic is as critical as ever to businesses. Legacy FDD radios are limited to symmetric traffic usage, leaving vast amounts of spectrum constantly underutilized. The B11, however, can dynamically adapt to bandwidth demand using Auto-TDMA technology, maximizing spectrum utilization throughout the day.

CALL US FOR BEST POSSIBLE PRICING
314-735-0270


Antenna Type: Backhaul
Frequency: 10 - 11Ghz
Price: $2,099.00
Product Details

Max Throughput Up to 1.5 Gbps IP aggregate UL/DL (1.7
Gbps PHY)
Low Latency 2+ ms
Wireless Protocols TDMA, TDMA-FD
MIMO & Modulation 4x4:4 MIMO OFDM up to 256QAM
Bandwidth Single or Dual 20/40/80 MHz channels
Frequency Range 10000-11700 MHz restricted by country of
operation
Max Output Power 20 dBm (2-stream), 27 dBm (4-stream)
Sensitivity ( MCS 0 ) -87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz
Max Power Consumption 30W
System Power Method 48 V DC 802.3 at compliant power injectors
System Lightning & ESD Protection 6 kV
PoE Power Supply Passive POE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection
Dimensions Height: 260 mm (10.2") Width: 158 mm (9.6") Depth: 70 mm (2.8")
Weight 2 kg (4.5 lbs)
Enclosure Characteristics Outdoor UV stabilized plastic Aluminum mounting panel
Wind Survivability 200 km/h (125 mph)
Wind Loading 9.89 Kg @ 160 km/h (21.8 lbs @ 100 mph)
Mounting Circular Waveguide fed mounting bracket direct into antenna
Optional Data Connector SFP Cage
Outdoor Ingress Protection Rating IP67
Operating Temperature -40°C to +55°C (-40°F to 131°F)
Operating Humidity 5 to 100% condensing
Operating Altitude 4420 m (14500') maximum
Shock & Vibration ETS 300-019-2-4 class 4M5
Gigabit Ethernet 10/100/1000-BASE-T
Fiber Port 10/100/1000-BASE-T
Dual Protocol Operation 2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA
Automatic load balancing of traffic across 4 total MIMO streams with individual stream
encoding up to 256 QAM
Management Services Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI
2.4 GHz 802.11b/g/n radio for local management access
Smart Antenna Alignment Hands-free dedicated 2.4 GHz Wi-Fi management radio alignment tool
Smart Spectrum Management Active scan monitors/logs ongoing RF interference across channels (no service impact)
Dynamic auto-optimization of channel and bandwidth use
Security 128-bit AES PSK with hardware acceleration
QoS Supports 4 pre-configured QoS levels
GPS Location GNSS-1 (GPS + GLONASS)
Colocation Synchronization 1PPS GPS TX/RX synchronization for colocated co-channel radios
Adjustable up/downstream bandwidth ratio
Approvals FCC Part 101 and EN 302 217-2-2
RoHS Compliance Yes
Safety UL/EC/EN/ 60950-1 + CSA-22.2
Product Reviews
Rate this product:  1   2   3   4   5